Ferolite CS
|
|
|
|
Made from chrysotile asbestos fibre and synthetic elastomers It is ideally suitable for joints with low sealing loads and relatively uneven sealing surfaces such as oil pans, valve covers etc. Characterised by controlled swelling in oil, Ferolite CS is extensively used in IC engines, compressors, pipe systems etc. Max. Internal Pressure: 100 kg/sq. cm. |
ASTM : F104 F112950 Tensile Strength: >=26 MPA Compressibility: 6-14% Recovery: >=40% |
|
Sheet Thickness: 0.25mm to 6.0mm Sheet Size: 1.5m x 4.0m, 5' x 12' 5.25' x 13.25' |
Ferolite IT 'O'
|
|
|
|
To seal off most transmission and hydraulic fluids, refrigerating and motor oils, carburetor fuel mixtures, steam, water/antifreeze and water/anticorrosion mixtures, alkalies and solvents. Max. Internal Pressure: 140 kg/sq. cm. |
DIN : 3754 IT- 'O' |